Modefined Lyra 200W Box Mod review by Mjag…Lost Vape quality?

Thanks for taking the time to check out my review of the Modefined Lyra 200W Box Mod which was sent to me by the fine folks at www.healthcabin.net

[​IMG]

Specs:

  • Temperature Limit: 2-600F/100- 300°C
  • 1.3” Full Colour Screen
  • Output power: 7Watts – 200Watts
  • Max charging current: 1A
  • Max output current: 39A
  • Output Voltage Range: 0.4-8.4V
  • Body material: Die Cast Zinc Alloy
  • Stainless steel 510 atomizer connector
  • Anodized Aluminum Faceplate
  • Spring loaded nickel plated brass center pin

STANDARD PACKAGE:

  • Lyra 200W Device
  • Charging Cable
  • Lyra Gift Box
  • Lyra User Manual

5 color options: Amber-Silver, Amber-Black, Black-Silver, Black-Black, Black-Red

[​IMG]

Read moreModefined Lyra 200W Box Mod review by Mjag…Lost Vape quality?

Eleaf TESSERA with ELLO TS kit review by Mjag

Thanks for taking the time to view my late but finally here review of the Eleaf Tessera with ELLO TS tank. I was provided a pair of kits directly from Eleaf for this review, why a pair? I will get into that in a moment.

[​IMG]

Specs:

Tessera mod:

  • 83mm H x 42.5mm W x 30mm D (510 area 25mm)
  • 169 grams weight
  • 1 to 150 watts
  • Output voltage: 0.5-8V
  • Output mode: VW/RTC/TC(Ni/Ti/SS/TCR)
  • Resistance range: 0.05-1.0ohm (TC modes) 0.1-3.0ohm (VW/RTC mode)
  • 3400mAh built in battery

Ello TS sub ohm tank:

  • 4ml (2ml TPD version) I measured 5ml with a syringe
  • HW2 Dual-Cylinder 0.3ohm Head (pre-installed)
  • HW1 Single-Cylinder 0.2ohm Head
  • Spare glass and o’rings

Comes in 5 colors:

[​IMG]

Read moreEleaf TESSERA with ELLO TS kit review by Mjag

Ehpro Iguana 20700 Squonk kit review by Mjag…Oh momma, you wanna see this!

I tell ya, sometimes it is right time, right place but that is how I got so lucky to wind up with the Iguana 20700 mech squonk kit from Ehpro. Last day of the ECC show in Ontario, CA and I was walking around with my bud Deuces Jack who luckily for the both of us needed batteries so it took us in that direction. We stop by the Ehpro booth to say goodbye and low and behold they remember us and hand us both there prototype Iguana Squonk kits to review….I just about danced a jig right then and there.

[​IMG]

There is not too much info on the Iguana kit but I did get some while emailing with Ehpro. It is not a resin, it is a Acetic acid plate which I have no idea what that means but wow is it sexy. Not sure when production with start or pricing as of yet but as of now they plan on making the Blue seen here and a White version.

Specs as I measured:

Iguana 20700 squonk mod:

  • 25mm x 86mm x 48.5mm
  • 6ml soft silicon squonk bottle
  • 20700 and I would suppose it would come with an 18650 adapter, it works with one I tried
  • Mech mod
  • Button lock switch

Iguana BF RDA:

  • 24.5mm diameter 22mm tall
  • Bottom airflow
  • 2 squonk feeder holes located right under your wicks
  • 810 drip tip with inner o’ring for friction fit goon/kennedy style 810’s
  • 4 post (can install your coils in either direction or do a dual coil stacked)
  • Domed inner top cap

Now let the sexiness begin!!!

[​IMG]

Read moreEhpro Iguana 20700 Squonk kit review by Mjag…Oh momma, you wanna see this!

Joyetech eGo AIO ECO review by Mjag

Thanks for taking a look at my review of the Joyetech eGo AIO ECO which was sent to me directly from Joyetech for the purpose of this review.

Specs:

  • Diameter: 14mm
  • Height: 113.0mm
  • Weight: 37.5g
  • E-liquid Capacity: 1.20ml
  • Coil head: BFHN 0.5ohm head
  • Max charging current: 1A
  • Output mode: constant voltage (1.85V) output
  • Battery capacity: 650mAh
  • Colors: Red, Blue, Black, Grey, Green

[​IMG]

Included in the package:

  • eGo AIO ECO
  • 2 BFHN 0.5ohm head (1 preinstalled)
  • USB cable
  • Manual
  • Warranty card
  • Warning card
  • Spare parts

Read moreJoyetech eGo AIO ECO review by Mjag

GeekVape Blitzen 24mm RTA review by Mjag…Flavor Blitz?

I received the GeekVape Blitzen RTA free of charge from www.2fdeal.com for the purpose of this review.

Specs:

Diameter 24mm
Depth 24mm
Height 47mm
Width 24mm
Product Weight 75g
Package Weight 179g

Features:

Gold plated 510 threading connection
Diameter: 24mm
Capacity: 2ml / 5ml (with extension tank)
Postless build deck
Single / dual coil configuration
Honeycomb adjustable side airflow
510 / 810 drip tip compatible (with 510 drip tip adapter)

Smooth side airflow blows directly to the coils to provide full flavor.
Large airflow comes from the side directly in a shortest path to provide maximum vapor production.
Build deck is built into the base for convenient access.
18mm postless build deck allows easy coil building and supports both single and dual coil build.
Bubble glass included to provide 5ml juice capacity expansion.

Package Includes:

1* GeekVape Blitzen 24mm RTA Rebuildable Tank Atomizer Standard Edition 5ml
1* 2ml Spare Glass Tube
1* 5ml Spare Bubble Glass Tube
1* 510 Drip Tip, 1 x 810 Drip Tip
1* 510 Drip Tip Adapter
1* Chimney Extender
1*Chimney Key
1*Allen Key
1* Manual
20* O-rings

[​IMG]

Read moreGeekVape Blitzen 24mm RTA review by Mjag…Flavor Blitz?

Eleaf iStick Pico 21700 kit with ELLO tank review by Mjag….Ello ello hey hey hey

Excuse my Rihanna impression in the title, what can I say, that song just iSticks with you…..yeah, I struggle…sigh.

The Eleaf iStick Pico 21700 kit with ELLO tank was sent to me for review directly from Eleaf.

Specs:

Eleaf iStick Pico 21700 Mod

  • Dimensions: 77mm to top of battery cap, 69mm without x 51mm x 26mm
  • Powered by a single 21700 or 18650 battery (with included 18650 adapter)
  • VW / Bypass / TC-Ni / TC-Ti / TC-SS / TCR
  • Wattage: 1W – 100W
  • Voltage: 0.5V – 9V
  • VW resistance: 0.1Ω – 3.5Ω
  • TC resistance: 0.05Ω – 1.5Ω
  • Temp range: 100ºC – 315ºC / 200ºF – 600ºF
  • 0.91” OLED display
  • 2A Micro USB charging
  • Firmware upgradeable
  • Dual circuit protection
  • Reverse polarity protection

Eleaf ELLO Sub Ohm Tank

  • 25mm Diameter
  • Stainless steel
  • 2ml/4ml E-Liquid capacity (4ml with included extension)
  • Sliding top fill
  • HW coils
    • HW1-C 0.25Ω Single Coil
      • Wattage Range: 25W – 50W (Optimal At 35W – 40W)
      • Ceramic Insulated Wicking System
    • HW2 0.3Ω Dual Coil
      • Wattage Range 30W – 70W (Optimal At 45W – 60W)
  • Dual adjustable airflow
  • Gold plated 510 pin

Available in a variety of colors

[​IMG]

iStick Pico 21700

I know there are a lot of fans of the iStick Pico mods and all the variations over the years. Can’t say I was one of them although I did own the 26650 version briefly before a friend of mine just had to have it. This is my first time using one over a month and although it didn’t wow me it also never let me down.

The thought of reviewing a 21700 mod did intrigue me, at the time I did not have any 21700 capable mods and included in this kit was a Avatar Controls 30A 4000mAh 21700 battery. The battery has been tested by Mooch, the name to know when it comes to batteries. He gave it a 20A 3900mah rating, using my Hohmbase charger in Battery Doctor mode I measured 4186mah but I would stick with Mooch’s ratings. There are better 21700 batteries out there, the Golisi S35 comes to mind which Mooch tested to be 30A and 3700 mah, less life but better if you vape at higher watts. 21700’s are still in there infancy though, better options are likely to be more plentiful in the future. If using with the included ELLO tank which works best under 60 watts the included 21700 will be fine though.

Eleaf does include a 18650 adapter, worked fine for me.

Read moreEleaf iStick Pico 21700 kit with ELLO tank review by Mjag….Ello ello hey hey hey

Ehpro Bachelor X RTA Review by Mjag

Hello once again and thank you for taking the time to view my review of the Ehpro Bachelor X RTA that was sent to me by my friends at www.heavengifts.com.

Specs:

  • 25.2 x 43mm(without 510 thread)
  • 3.5ml Innovative single coil build RTA
  • 5ml Extra bulb glass tube included
  • Centered build system making installing coil super easy
  • Gold-plated deck for perfect electrical conductivity
  • Adjustable bottom-up direct airflow control
  • Easy top filling design
  • PEI 810 wide-bore drip tip with high heat resistance

What’s included

[​IMG]

  • Bachelor X RTA
  • Allen key
  • 5ml bubble glass
  • pack of spare o-rings
  • 1 sheet of cotton
  • 4 extra gold plated grub screws
  • 3 Pre-made parallel clapton coils
  • User manual

Available in 3 colors
[​IMG]

Read moreEhpro Bachelor X RTA Review by Mjag

Vandy Vape Phobia RDA review by Mjag…No More Fear…No More Phobias!

Ok ok, that last part of my title is cheesy but that is what is written on one of the top caps….

[​IMG]

If you have a phobia to noisy airflow you may want to read on…..toot toot.

Specs:

  • 24mm diameter 31mm tall to top of chuff cap excluding 510 pin
  • Gold plated 510
  • Squonk pin included
  • Gold plated phillips installed and allen grub screws included as spares
  • Postless design
  • Dual airflow, hits from the bottom and slanted sides
  • Includes 2 sleeves, 1 for 810 drip tips and the other for included chuff cap
  • 510 drip tip adapter

More info can be found on Vandy Vapes site: http://www.vandyvape.com/detail/atomizer/Phobia_RDA/

Included in the package (Please note I received a trial production sample, retail versions may vary)

[​IMG]

Read moreVandy Vape Phobia RDA review by Mjag…No More Fear…No More Phobias!

Coil Master Elfy RTA review by Mjag….Time to get your 22mm mods out!

Thanks for taking the time to check out my review of the Coil Master Elfy RTA which was sent to me directly from Coil Master.

[​IMG]

Features:

  • Designed for flavoring taste and cloudy vaping
  • Funnel-shape designed delrin drip tip
  • Air-releasing top fill design
  • Dual adjustable air flow control
  • Parallel post design/ PEEK insulator
  • Gold plated bottom pin
  • 304 stainless steel
  • Single coil deck

Specifications:

  • 22mm in diameter for glass tank
  • 23mm in diameter for deck and top cap
  • 33.5mm in height
  • (not includeing drip tip and 510 contact)
  • Capacity : 2.5ml (more like 2.3ml, 2.5 fits but may leak when you screw the top cap back on)
  • Weight : 46.5g

Contents:

  • 1x Elfy RTA
  • 1x Extra glass
  • 2x Screwdriver
  • 1x cotton
  • 2x Clapton coil
  • 6x Silicone Rings
  • 1x Hex driver
  • 1x User Manual

Read moreCoil Master Elfy RTA review by Mjag….Time to get your 22mm mods out!

Lost Vape Therion BF DNA75C Squonker Mod Review by Mjag

Hello once again and thank you for taking the time to view my review of the Lost Vape Therion BF DNA75C Squonker Mod which was provided by my friends at www.healthcabin.net . They are currently having a 10% of sale (except Clearance) from Feb. 10 – 25 2018 Coupon Code: CNY2018

What’s included

[​IMG]

  • Therion DNA75C BF Device
  • USB Charging Cable
  • 7ML Silicon Squonk Bottle
  • 30ML Silicon Refilling Bottle
  • Therion USER Manual
  • Warranty Registration Card

Available in Black and Silver and a variety of leathers, not all colors shown below.

[​IMG]

Read moreLost Vape Therion BF DNA75C Squonker Mod Review by Mjag

You must be 18 years old to visit this site.

Please verify your age

%d bloggers like this: