I tell ya, sometimes it is right time, right place but that is how I got so lucky to wind up with the Iguana 20700 mech squonk kit from Ehpro. Last day of the ECC show in Ontario, CA and I was walking around with my bud Deuces Jack who luckily for the both of us needed batteries so it took us in that direction. We stop by the Ehpro booth to say goodbye and low and behold they remember us and hand us both there prototype Iguana Squonk kits to review….I just about danced a jig right then and there.
There is not too much info on the Iguana kit but I did get some while emailing with Ehpro. It is not a resin, it is a Acetic acid plate which I have no idea what that means but wow is it sexy. Not sure when production with start or pricing as of yet but as of now they plan on making the Blue seen here and a White version.
Specs as I measured:
Iguana 20700 squonk mod:
- 25mm x 86mm x 48.5mm
- 6ml soft silicon squonk bottle
- 20700 and I would suppose it would come with an 18650 adapter, it works with one I tried
- Mech mod
- Button lock switch
Iguana BF RDA:
- 24.5mm diameter 22mm tall
- Bottom airflow
- 2 squonk feeder holes located right under your wicks
- 810 drip tip with inner o’ring for friction fit goon/kennedy style 810’s
- 4 post (can install your coils in either direction or do a dual coil stacked)
- Domed inner top cap
Now let the sexiness begin!!!
A little better lit pic to get an idea of the true color
Other side, can I get a what what!
I have been just in love with this kit since I got it about 6 weeks ago, I really could have written this review the first week. With my review que and just wanting to see if any problem appeared I had to wait it out but used it everyday and believe me, it was not a chore.
The Iguana squonk mech is really really nice, I have so been enjoying it. Feels comfortable in the hands with its rounded corners and the back has a little bit of curve to it, you may be able to see it in this pic below.
Not much to the interior, it is a mech mod so that is to be expected but it has performed brilliantly.
There are battery orientation markings that are a little hard to see.
The markings are actually imbedded into the mod, might not be everyone’s taste but I love it.
Even the button is a very nicely machined hunk of metal with a cool camera style locking mechanism.
I gotta tell you, after 6 weeks I still love this mod. Not only is it a looker but I have not run into one major problem while using it but a few minor quibbles.
The spring loaded 510 is big time stiff but never gave me any problems with any tank I tried on it. The panel can get a little loose when squeezing the squonk bottle, I once popped it out of place. No battery ribbon so getting the battery out is a little more of a chore than it should be. The 510 plate is slightly raised so there will be a small gap under your tank. 21700 are too wide, they go into the mod but the panel will not fit properly. All that is minor though, I am just putting that out there to get as much info out to the vape public as possible. I would say my biggest gripes would be getting the battery out and the panel flex when squonking.
I never did get a Vandy Vape Pulse BF mod, I have a friend who had one and it was just meh to me. I have a couple of other mech squonks but hardly use them over my regulated squonk mods. This Iguana though, with a great single coil RDA like the one it comes with I have a hard time putting down.
The Iguana RDA
Now as impressed as I am with the Iguana mech mod the matching Iguana RDA is just as impressive, just look at how thick the top cap is and they domed the inside chamber!
Airflow comes right from under the coil and the squonk feeder holes are on either side, right were you lay your cotton down…..brilliant!
Uses the same style posts as the Ehpro Bachelor X which means it doesn’t matter if you wind your coils clockwise or counterclockwise, you can easily install them. You can also run dual stacked coils if you so wish like I did with the Bachelor X.
I didn’t try that build with the Iguana RDA though, I was enjoying the single coil builds so much I didn’t feel it was necessary but it sure is doable.
The overall build quality on the Iguana RDA is above and beyond what I was expecting. The only trouble I ran into was when I cranked down on one of the grub screws a little too much and it bent the outside post a little. I just carefully bent it back with a wrench and all was well.
Builds are as simple as you would expect looking at the deck, the only thing that is a pain is removing one or sometimes both screws to install your coils. You can get some pretty thick coils in there as well, I just had to try this crazy coil I found in my stash.
That was probably one of my least favorite builds but hey, it can be done.
O’rings are just about perfect, grub screws are excellent and the airflow control is smooth as silk, they really made an excellent RDA and I hope this is exactly what goes into production.
Flavor wise I am sure you can guess with bottom airflow and a domed top cap in a small chamber that it is lights out good, well you guessed right.
Really my only complaint with the Iguana RDA is I am not crazy about the posts considering I bent one. It bent back easy enough but I am also not crazy about removing a screw or sometimes both with big builds. Of course I dropped the screw a couple of times and luckily found it again but a post system where the screws stay put would be an improvement.
After reading this your probably wondering….hmmmm, I wonder if he liked it or not? OK, you probably guessed that yeah, this guy won’t shut up about how much he enjoys this kit. I normally don’t like to go fanboy about anything but I love it so much…..my precious.
I have no idea on pricing yet but Ehpro is known for putting out products at a great value and I am hoping that is the case here. They really did go out of there way to put a quality piece of kit out though, this screams high end and one of the reasons I am so happy with it.
I also have no idea what will be included with the kit, all I got handed was exactly what you see, no box, accessories or anything else.
If you like what you see then you won’t be disappointed with the performance, it works just as good as it looks.
Please keep in mind this is a Mech mod which means you must know your Ohms law and batteries to be used with it. Steam Engine has a lot of useful information including a Ohms law calculator that can be found here: http://www.steam-engine.org/ohm.html
Mooch is the guy to see for battery info, check out his facebook here: https://www.facebook.com/batterymooch/
- Sexiness and then some
- Excellent fire button and cool locking switch
- Thick top cap on RDA with domed inner chamber for excellent flavor
- Bottom airflow
- O'rings are just about perfect on RDA
- Smooth airflow control
- Excellent grub screws
- Squonk feeds to both sides of your wicks
- Access panel on mod can flex or come out of place when squonking
- 510 plate a little raised so tanks don't sit flush
- No battery ribbon so removing battery can be tricky
- Posts on RDA can bend if over tightened